Food-safe folding cartons built for barriers, inks, and compliance
Protect your food products with folding cartons engineered for safety, shelf presentation, and production reliability. Netpak supports food packaging programs with barrier coatings, low-migration inks, certified substrates, and quality systems aligned with FDA and Health Canada expectations.
Food-safe folding cartons designed for direct and indirect contact
Netpak integrates paperboard selection, barrier coatings, low-migration inks, certified substrates, and production controls, including BRCGS Packaging Materials AA+ systems, to keep food products protected, compliant, and shelf-ready.
Expert Paperboard Selection
Food-grade SBS, CRB, FBB, micro-flute
We specify SBS, CRB, FBB, micro-flute corrugate, and related board options around performance, strength, print quality, and food safety requirements.
Barrier Coatings That Work
Oil and grease resistance with adhesion control
Poly-coated paperboard options help resist oil and grease. Corona treatment supports secure coating, ink, and adhesive bonding for consistent barrier performance.
Low-Migration Inks, Varnishes & Coatings
Water-based, odourless, contact compliant
Water-based, odourless inks and adhesives help support food-contact requirements while preserving print quality, coating performance, and recyclability goals.
Certified Food-Safe Practices
BRCGS AA+, chain-of-custody, and quality systems
BRCGS Packaging Materials AA+, ISO 9001, GMI, G7 Master, FSC, SFI, and PEFC programs support food safety, colour control, traceability, and sourcing documentation.
Board selection affects barrier performance, print quality, and food-safety planning
Food packaging needs more than strong graphics. Board, coating, ink system, adhesive, storage condition, and production handling all affect safety, appearance, and shelf performance.
SBS for clean food packaging graphics
SBS gives food cartons a bright, smooth print surface for high-impact graphics, clear brand colour, and premium shelf presentation.
CRB for recycled-content food programs
CRB can support mainstream food and consumer goods cartons where recycled content, cost control, and solid print performance matter.
FBB and micro-flute for structure
FBB and micro-flute can add stiffness, lightweight strength, and better support for larger packs, display cartons, multipacks, and protective food packaging.
Food packaging structures for shelves, handling, and fulfillment
Start with carton styles commonly used for food packaging, then filter by use case. Netpak can adapt these structures with food-safe boards, barrier coatings, low-migration inks, certified sourcing, and production controls.
Auto-Bottom Tray
Fast-erect tray for bakery, confectionery, snack packs, and kitting lines that need speed and base stability.
Double-Wall Tray
Reinforced tray structure for bakery, prepared food, and premium food programs where stiffness and presentation matter.
Tray and Sleeve
Rigid tray with printed sleeve for premium dry food, chocolate, gifting, and retail-ready food presentation.
Sleeve
Slide-on branded cover for trays, multipacks, and dry food cartons that need billboard space without excess material.
Auto-Bottom Carrier Box
Pre-glued carrier format for multi-unit food packs, sampler sets, and retail programs that need fast setup and handling strength.
Auto-Bottom with Display Lid
Shipper-style structure that converts into a display for snack, confectionery, and retail food programs.
Double-Wall Tray and Lid
Protective tray and lid format for premium food, bakery, gifting, and display cartons that require clean stacking.
Double-Lock Wall with Lid
Pizza-style folding carton for bakery, meal kits, prepared food, and shallow products requiring a wide opening.
Four-Corner Cake Box
Rigid bakery format with clean angles and strong presentation for cakes, pastries, and specialty food items.
Seal-End
End-sealed carton for dry food, high-speed packing, consistent facings, and efficient case packing.
Seal-End Auto-Bottom
Combines pre-glued bottom speed with sealed-end control for dry food and retail-ready production lines.
Custom Insert
Die-cut insert for confectionery, kits, samplers, and premium food sets that need product separation and presentation.
Engineered for barriers, ink migration control, and shelf performance
Food packaging decisions should happen before production. Netpak aligns board, structure, coatings, inks, adhesives, artwork, finishing, traceability, BRCGS AA+ controls, and logistics around the actual food use case.
- âś“Strength and print clarity: choose kraft-style materials for durability, or SBS and FBB when premium graphics and clean retail presentation matter.
- âś“Reliable adhesion: corona-treated poly-coated boards help maintain consistent dyne levels so coatings, inks, and adhesives bond securely.
- âś“Food-safe inks and coatings: low-migration, water-based ink and coating systems help reduce risk while preserving print clarity.
- âś“Certified production controls: BRCGS Packaging Materials AA+, barrier zones, varnish zones, fold scores, glue areas, and carton structure are checked before the job reaches press.
From design to delivery, food packaging needs one controlled workflow
Netpak connects material stocking, structural design, prepress, finishing, quality control, BRCGS Packaging Materials AA+ traceability, warehousing, and logistics so food carton programs move cleanly from specification to shipment.
- 1
Fast Turnaround, Stock Ready
Netpak holds board inventory across North America. When speed matters, stocked materials and just-in-time delivery programs help keep food carton timelines moving.
- 2
Technical Expertise on Demand
Our team supports structural design, prepress, colour, finishing, lamination, UV varnish, embossing, and logistics for food folding carton programs.
- 3
Sustainability Without Compromise
We combine responsible sourcing, waste reduction, recyclable material planning, and BRCGS AA+ quality standards so sustainability does not weaken food packaging performance.
Food-safe by design, built for compliance
Netpak specifies certified substrates, barrier coatings, and low-migration inks around food-contact conditions, filling method, storage, shipping, shelf presentation, documentation requirements, and BRCGS Packaging Materials AA+ production controls.
Prepress, colour, coating, and documentation need to align before press
Food-safe carton production is strongest when artwork, coating zones, varnish zones, nutrition panels, barcodes, dielines, colour targets, low-migration requirements, and certification documentation are reviewed together.
Artwork and file preparation
Prepress review helps confirm nutrition panels, regulatory copy, barcode placement, bleed, trapping, coating zones, and food-safe print requirements.
Colour and shelf consistency
Colour verification and calibrated offset production help keep food packaging consistent across SKUs, reorders, display cartons, and retail sets.
Retail and multipack structures
Food cartons, sleeves, trays, multipacks, and display-ready formats are specified around product weight, shelf presentation, and distribution handling.
Food packaging knowledge that supports regulated, retail, and consumer categories
Food. Beverage. Health and beauty. Retail. Pharmaceutical. Electronics. Each program is built around the right board, barrier needs, print surface, certification expectations, and retail presentation.
Ready to secure food integrity with expert folding cartons?
Provide your carton substrate preference, barrier requirement, food-contact condition, run size, and artwork considerations. Netpak will help pair your product with the right board, coating, ink, certification path, and production plan.
Food packaging backed by BRCGS Packaging Materials AA+ controls
Netpak’s BRCGS Packaging Materials AA+ certification supports food packaging programs that require documented hygiene controls, traceability, manufacturing discipline, and verified production standards.
For food brands, this gives procurement, quality, and regulatory teams a clearer basis for supplier review, especially when packaging must support direct or indirect food-contact applications.
Food packaging with production controls buyers can verify
Netpak supports fiber-based food packaging and circular practices. We offer certified sourcing options and operate under recognized production standards including BRCGS Packaging Materials AA+, ISO 9001, FSC, PEFC, and related packaging quality programs.
Common food packaging questions
Answers to common questions about food-safe folding cartons, direct and indirect contact, barrier coatings, low-migration inks, substrates, BRCGS AA+ certification, samples, and quote preparation.
Are these cartons safe for direct food contact?
Yes, when the structure, board, coating, ink, adhesive, and use condition are specified correctly. Netpak manufactures for direct and indirect contact applications and validates material choices for the intended food packaging use.
Which substrates do you use for food packaging?
Common options include SBS, CRB, FBB, SUS, and micro-flute, depending on graphics, stiffness, product weight, barrier needs, sustainability goals, and contact conditions.
How do barrier coatings improve protection?
Barrier coatings can improve resistance to oil, grease, moisture, and handling conditions. The coating must be matched to the board, food product, filling method, distribution path, and recyclability expectations.
What are low-migration inks and why do they matter?
Low-migration inks are designed to reduce the risk of ink components transferring into food or food-contact areas. They matter for packaging programs where safety, odour, compliance, and consumer trust are critical.
Can you support frozen, refrigerated, or warm-fill products?
Yes, depending on the product and package structure. Temperature, condensation, grease, moisture, filling method, and shelf-life expectations should be reviewed before board and coating selection.
Do coatings or films affect recyclability?
They can. Coating type, film type, material combination, local recycling rules, and package design all affect recyclability. Netpak can help evaluate tradeoffs before final specification.
What do you need to prepare an accurate quote?
Send dimensions, product type, direct or indirect contact condition, target board, barrier needs, artwork status, run size, finishing requirements, delivery timing, and any retailer or certification requirements.
How should artwork be prepared for food-safe production?
Artwork should be reviewed alongside dielines, coating zones, varnish zones, barcode placement, nutrition or regulatory panels, bleed, trapping, and any low-migration ink requirements before plates are produced.
Which certifications and quality systems do you operate under?
Netpak supports food packaging through recognized production, quality, colour, and sourcing systems, including BRCGS Packaging Materials AA+, ISO 9001, GMI, G7 Master, FSC, PEFC, and related programs.
Can you provide samples or documentation before production?
Yes. Samples, prototypes, board guidance, coating review, BRCGS AA+ documentation, and supporting material records can be coordinated depending on project scope, buyer requirements, and production timing.